Product(s): Promis.e CONNECT Version(s): 10.02.00.XX Environment: N/A Area: Wire Numbering Subarea: Automatic Wire Number Background: The Automatic Wire Number dialog enables users to automatically assign numbers to wires and other logical lines. The tool provides the ability to assign wire numbers using Odd or Even numbering schemes according to your requirement. See Help for more details. Steps to Accomplish : 1. In Promis.e go to Electrical >> 2D Design >> Automatic Wire Number under Wire Properties . 2. Next specify the First Number and Interval under Label Name according to your requirement. e.g. If there is requirement for assigning Odd numbers to a group of wires you can use a starting number of 1 and specify an interval value of 2. Select OK to assign the wire numbers. 3. Next if you have selected the Labelling Section as Select Pages or Select Objects you can follow the below details accordingly. If Project is selected for Labelling Section, select ok in Wire – Auto Label dialog and then wire number are assigned. Select Pages - Next in Select pages dialog and select Page(s) and then select ok and Wire Number will be assigned. Note: Use Ctrl + Select page for multiple page selection. Select Objects - Next in Select Objects select logical wires are that wire number need to be assigned automatically and then after selection right click to assign wire numbers. Original Author: Satish Saptasagar
↧